20 Fun Facts About Window Repair

Window Repairs
Window repairs can save homeowners money and help keep their homes warm. In the event of serious damages, like broken glass or a shattered frame, a replacement window may be required.
But many other issues can be addressed to extend the lifespan of your windows. Common problems include:
Broken or cracked panes
Cracked window glass could be caused by a lawnmowers who throws errant rocks or by branches of trees being blown by strong winds. It's not just visually terrible, but it could cause more energy costs because broken glass lets cold air into your house. Luckily, it's typically simple to repair windows with damaged panes.
Begin by carefully removing glass with gloves and safety sunglasses. You may have use a utility knife to remove old glazing compound or putty around the frame's edges. Next, wipe down the surface of the glass and the wood of the frame using a soft cloth or paper towel.
Once the frame is clean and dry, apply a waterproof silicone caulking on the frame's perimeter. This will prevent water from leaking into the frame through the crack and causing further damage.
If you have double-pane glass a bad crack could compromise the gas layer between the panes and make your windows less efficient in insulating. If the crack is significant enough to cause damage to the quality of the glass or the glass has an inner pane that's totally missing, it's the time to call a professional.
Thermal stress cracks may also occur when there's an extreme temperature difference both inside and outside your home. This causes the glass to expand and contract. If this happens on two portions of a window it's best to replace the glass instead of attempting to repair it.
For windows that have cracked but aren't quite ready to be replaced clear tape can do a good job of stabilizing the crack and preventing the entry of bugs and cold air. You can cut a nylon stocking large enough to completely cover the crack and glue it with duct tape. It's not an indefinite solution, but it's a good way to keep insects out and cold air away from your home. If your windows are older and you're beginning to notice cracks in the glass, it's a good idea to check with your local window company about whether replacing the entire window might be a better option for you.
Rotten Wood
Wood rot is one of the most frequent problems that plague windows. It can damage a home's appearance and create a safety danger. However, it is possible to fix rotted wood. It is first necessary to address the cause of the wood decay. Check for roof leaks and other areas where water could get into the wood.
You'll then have to remove the rotten parts of the window frame. This can be accomplished with the use of a chisel, rasp or claw hammer. After removing the rotten wood, you'll need to replace it with new wood. It is recommended that you make use of pre-treated wood for this project as it will be resistant to rot. If you are not able to replace the wood that has been damaged, you can try using filler or wood hardener to repair the damaged area. This kind of product can be found in a lot of hardware stores. Follow the directions on the label of the product to achieve the best results.
After you have repaired the damaged areas of the window sill, it's important that you protect the area. Apply a water-resistant sealant the wood. A product such as Sikkens is an excellent option for this job.
Use a two-part epoxy to protect the wood from further damage. It is easy to apply and leaves a beautiful finish. However, it is very important to follow the application instructions on the label. After the epoxy filler dries you can sand the surface of the wooden. It is best to start with a rough grade of sandpaper and then move to a smoother one.
You do not want to expose the rotted part to more moisture. So, it's a good idea to cover the area that has been repaired with an oil-based primer that will help protect it from moisture. Then, you can apply waterproof wood sealant.
The W won't let you open
A window that isn't opening can be caused by a variety of factors. The house may have settled or the wooden frames could have warped during humid weather. Someone might have also nailed them shut for security. However, with a bit of patience and the right tools, all windows that are stuck can be opened.
Gunk or debris that has accumulated could be the main cause of a window not opening. Grime and dirt build up on the sliding tracks, hinges and locks over time, notes Acme Glass. Additionally, metal hardware can rust when it comes into contact with humidity and direct sunlight. Spraying grease on these areas can help prevent oxidation, and keep your windows functioning properly.
The pulleys that raise or lower the window can be loosened, or break. These components may lose tension and become obstructed particularly when the window is situated two or more stories higher than the ground.
If you're having difficulty opening the window, try using a pry bar to gently push the window to open a bit at each time. Put Get More in the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Alternatively, try running a hair dryer across the edges of the frame for several minutes to warm the wood and allow it move more easily.
A broken spring could be the cause of a window that won't raise or lower. Based on the manufacturer of the windows, you'll have to consult the manual of your owner for additional instructions.
If you've tried cleaning the moving parts of your windows and lubricating them, but they're still unable to open It could be time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let windows in your home go from being functional to unusable. If your windows aren't properly shut can make your home vulnerable to burglary and water damages. Contact our team for more information on our windows replacement services and products today!