14 Common Misconceptions About Double Glazed Window Repair

Double Glazed Window Repair
Double glazing is an excellent investment in energy efficiency. It helps prevent loss of heat during winter months and helps keep your home cool during summer. Repairing your double-glazed windows when required is a great method to ensure they are in good condition.
Over time, condensation and misting can affect your double-glazed windows. Double glazed windows can be difficult to open and close.
Broken Panes
A stray baseball or a stray pebble from your lawnmowers or even a heavy storm could break the double panes of your windows, leaving your home exposed to the elements. While upvc windows repair damaged window may be difficult to repair, you don't have to have it replaced entirely. In fact the insulated glass between the two panes is in good condition and you can repair your double-pane window with a little DIY effort.
First, you'll need to take any broken glass from the frame. This can be messy work and you'll need to be cautious to prevent any glass shards from falling onto the floor or sliding out of the frame. Make sure you wear gloves to shield your hands from injury and a rag to protect the area around the broken glass to avoid further cuts or breakage. After removing the broken glass, clean the frame of the window thoroughly to get rid of any sealant or debris. It's important to sand rough areas of your frame to ensure a smooth surface for your new glazing.
After cleaning the frame then you can apply a new layer of glass to the place where the damaged pane was removed. This is the best method to ensure that your window is secure and sealed and will aid in reducing energy costs by preventing drafts and water from getting into your home. The next step is to choose your glazing material. There are several options, including clear tape that is more durable than regular tape, and can prevent further cracking of your window or glazing film, which is similar to clear plastic wrapping. The benefit of this option is that it can be painted to match your existing frame and will keep out snow and rain as well.
Whatever material you choose, it's important to press the glaziers points into the gap where the putty meets your frame. They will help hold the glass in place and will help it stick to the frame. The glazier's point can be found in hardware stores, and are available in pre-made ropes that you simply roll out onto the frame rabbets.
Condensation
If you are experiencing issues with condensation, it's recommended to contact the window manufacturer. There are warranties and guarantees to address these problems. Condensation or fogging between the panes of your windows is a sign that your seals are broken. Only an expert can fix this issue by replacing both panes.
It's a difficult process that requires special tools to remove and replace the window. A professional can complete this task and provide the tools. Utilizing these tools could be dangerous, however, so it is always best to leave this type of job to professionals.
Wear safety gloves and glasses if opt to do it yourself. You could be exposed to glass fragments flying around. It is essential to take out any putty or metal glazing points from the grooves that will hold the new window. You should also brush the frame with wire and vacuum or wipe it clean with a damp cloth. After the frame has dried, you'll need to order a replacement piece of glass that is 1/8" shorter in both directions than your existing window. Check the glass's fit into the grooves.
Based on the frame you have, you will then need to apply a thin layer of silicone caulk on the grooves to ensure that the new pane is secure in position. After the silicone caulk is dried you can smooth it out and make any necessary adjustments. The wood molding can then be reinstalled.
Double glazed windows can become difficult to open or close if the weather changes dramatically. Extreme temperatures can cause frames to shrink or expand and cause them to sag or stick. If this is the issue try wiping the frames down with water and lubricating the joints. However, it may be best to contact the company that installed your windows for help.
Misted
Misted Double Glazing is a problem with windows that is caused by moisture getting trapped between the glass panes of your double glazed windows. Double glazing consists of two panes of glass which are separated by an insulating space typically filled with argon gas to provide increased thermal efficiency. This creates an airtight seal that keeps warm air inside and cold outdoor air outside which allows you to keep your temperature at a comfortable level in your home.
Over time however, this seal can break down and moisture will begin to build up between the windows, causing them to turn misty. This happens because the gap between the panes is heated by the sun, causing water vapour to build up within it.
This is a normal thing to happen however, if it occurs between the window panes, it can be a problem since it is no longer able to control the temperature in the room, and allows the outside temperature to influence the indoor temperature. If you notice that your double glazed windows are becoming misty, call in the experts at Northfield Glass to investigate.
We can replace the sealed blown unit without having to replace the entire window, which is a lot less disruptive than a total replacement. Our misty glass repair involves taking off and cleaning the unit of glass, then replacing it with a new one. This creates a seal that is watertight again.
Some companies in the industry claim to inject chemicals through holes drilled into windows with mist to remove the fog and condensation. We do not recommend this method. This method is not only unsightly, but it could also harm the toughened glass and result in a window that does not completely function.
It is important to fix the issue as soon as you can, because if left untreated it can lead to mould growth that not only damages the window, but also poses health risks to your family. Moisture can also cause problems in your home, such as dampness or rot. In some cases, the window may need to be replaced entirely.
Blown or Failed
Modern double-glazed windows come with two glass panes with an inert gas or air in between them. This increases their thermal efficiency by keeping heat in and the cold out. Over upvc window repairs , this gas can become depressurised and cause a variety of issues.
Condensation between panes is one of the most common. Although it's a normal event, it doesn't necessarily mean that your window is damaged, it can be an indication that you need to re-seal your windows. Condensation is also an indication of a damaged double glazing, which could require re-installation.
It is also important to look for drafts coming through your double-glazed windows. This could be due to the seal being damaged or handle that is broken, or a damaged lock. A draught can be quite noticeable and will lead to higher heating costs, so it is important to get it fixed sooner rather than later. You can test the seals by feeling around the edges of the window frame to see whether you feel cold air.
Another indication that your window seals are failing is when you start to notice water beading on the inside of your windows. This is an indication that you have to reseal the double glazed windows.
Your window frames are designed to move slightly and this is essential to keep the glass sheets in place. However, over time this special packaging material may become compacted and this will crack the crucial seal. This allows air to circulate between the panes, and decrease the efficiency of your window.
Double glazing that has ruptured an air seal is an indication of failure and should be repaired as soon as possible. A damaged seal will stop your double glazing from performing its primary purpose of keeping cold out and warm inside. A damaged seal could let moisture in your home, which can cause mold and other unpleasant conditions. Contact a double glazing expert immediately you notice a blowing window seal. They can fix the entire unit.