Fitting a Cat Flap

It can be difficult to install a cat flap but with the right instructions, it's not too difficult. First, decide how high you want the flap to be (on average the belly height). Then, mark this area on your door and use the included template to help you drill.
If you have a kitten that is still a baby and you want to keep the door open, gently prop it slightly open and invite it to go through. Reward the kitten as it moves through.
Measure the Door
A cat flap is an excellent method to let your pet move into and out of your house as it wants. This can help keep your cat healthy as it ensures that it gets enough exercise and be able to return inside if it gets trapped in the elements during bad weather. cat flap install will cut down on the time you allow your cat go in and out and make your home safe by letting you know when it's left.
It is essential to ensure that the cat flap is placed properly to stop your pet from being pushed through or escaping through it by other animals (e.g. dogs). You should determine the height of your pet's stomach and the width of the doorway in your home to ensure that the flap is at the correct height. If your cat is a little longer or taller than the average, you can alter the flap's height by moving it up or down a small amount.
The next step is to use a spirit level to mark the centre of the door, where you will be installing the flap. Then, using the markings as a guideline, cut out the contour of your flap on the door with a jigsaw. After you have cut the area then sand the edges to create smooth surfaces. Drill any necessary holes.
The process of fitting the cat flap isn't as difficult as you may think, and it shouldn't take more than two hours to finish the entire job from start to completion. However, the process may be slightly more complicated if you need to fit it inside the door of a uPVC or composite door since these doors have various thicknesses that can affect the way the holes are cut and what they are fixed into. This is why we always recommend hiring a professional to complete the task, especially when you've never dealt with glass before.
Measure Suggested Site can spare you from hours of hearing your pet's cries for you to let it in or out. This is especially helpful if you are at work most of the day and your cat has to stay in the house waiting for you to get home regardless of the weather.
If you want to fit a cat flap inside your door it is important to measure your cat before attempting the task. While cat flap install may seem to be a simple task, it is important to get the measurement right or your pet will be unable to use.
First, make sure your cat is calm prior to taking measurements. You'll need to keep your cat in a place in which they cannot move. Also, make sure that the measuring tape is flat and not curved against their body. Keeping the measuring tape or ruler against their body from their head to the base of their tail can allow you to get an accurate measurement.
Once you've got the measurement of your cat, it's time to take a look at the door and decide on where to put the flap. It is advisable to place the flap in the middle of your cat's belly as this will allow them to move through it with minimal effort. This will also stop the flap from making too much noise as it swings back and forward.
You will need to think about the thickness of the uPVC or composite door, as well. While timber doors are of the same thickness, uPVC and composite doors may differ in their overall design, which can make fitting a cat flap more complicated since you have to make sure the hole you cut is the correct size for your pet.
It is also worth studying the instructions that come with the cat flap kit to locate an outline of the template that can be used to mark out the position of the hole in the door. This will enable you to determine where the hole needs to be located and ensure that the template is set correctly on the door. Utilizing a spirit level to check that the template is sitting flush against the door can be very helpful.
Cut the Flap
You'll need to cut an opening in the door panel for your cat flap before you can install it. This can be a daunting job so it's recommended you engage a professional to assist you if you don't have the expertise or experience. You can also consult the instructions that come with the kit to learn how to do it correctly.
You can consider the height of your cat's or kitten's stomach as a guide. A good rule of thumb is to set the flap of your cat about 10 centimeters away from the ground since this is the typical belly height for cats. This will allow your cat to move through the flap without difficulty and make it more difficult for other cats or nosy neighbours to enter or exit.
Mark the position of the cat flap on the door using a pencil. If your kit includes an outline of paper, place it on top of the door and use the marks to drill holes in each corner of the template. Then, you'll be able to cut out the template and replace it with the flap for cats.
You can put in your cat flap yourself on the door made of wood or uPVC when you're confident using a Jigsaw. Make sure you don't cut into any of the door mullions or vertical rails. You can use a jigsaw cut the panel into a square or a circle, depending on the design of your cat flap. Make sure to take your time and don't force the jigsaw to cut faster.
After the hole has been cut, carefully place your cat flap in its new place of residence. Make sure that it is firmly secured. If it features caps for screws, then put these onto the protruding screws. Once the screws are in place, sand any rough edges of the cut and then apply sealant around any gaps to ensure there aren't any draughts entering into your home.
Fit the Flap
If you have a simple cat flap, you can open it and encourage your pet to walk through by putting a small amount of cat food in the front of the door. Alternatively you can try pushing the cat through using your hand or a stick. Once your cat has become comfortable walking through the flap, it will be able to come and go as it pleases. This will allow you to let it in and out at any time it wishes.
It is possible to fit an animal flap into a UPVC door or a glass door, however it may not be as simple as installing one in a wooden external door. This is due to the fact that the UPVC doors and certain types of glass doors don't have a uniform thickness. This could have a significant impact on how you cut the flap's hole and how well the flap fits after installation.
Depending on the type of cat flap you choose It may include a mounting kit and a template that will tell exactly where to drill the holes for it. If the kit doesn't come with an example you can use a photocopier to create your own. When cutting, it is important to avoid pushing the jigsaw too hard so that you don't make a larger hole than you need in your door.
The majority of cat flaps are square or rectangular in shape but there are some that are circular and these are usually more difficult to fit. If you have a round flap, make sure that the hole is in the correct spot on your door. Otherwise, the cat might not be able use it, and could be locked outside for the entire day (or night).
Certain cat flaps have locks that allow you to determine when your cat enters and leaves. These can be very useful if you're worried about your pet going out at night and then coming back in due to the darkness, or you're at work for the entire day. Some locks can be used to lock access or exit, and others can be locked both ways. This is useful for sick or older cats who do not want to go outside in bad weather.