Solutions To The Problems Of Double Glazing Lock Repairs

Double Glazing Lock Repairs
Quality locks on your doors and windows will stop burglars from entering your home. They generally don't like breaking glass or squeezing through windows that are open.
However, some double glazing owners have encountered issues with their door or window lock after it was installed. Luckily, these problems can be fixed without having to purchase new double glazing.
Broken or Faulty Locks
A locksmith can fix your uPVC window or door lock if damaged or broken. They can fix the striker plates, hinges and locks on your double glazing. They can also reposition the cylinder to correct any misalignment that may cause your handle to work properly.
The mechanism may be locked when the key fits into the lock, but it will not turn or be difficult for you to insert. This could be due to dirt or grime accumulating in the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. It is important to apply a dry lubricant such as graphite or teflon instead of oil which attracts dirt and stick to the interior of the mechanism. After lubricating the lock, you should insert the key and try to turn it. The lubricant should work through the mechanism and the lock should be able to turn with ease.
Screws that are loose within the lock mechanism are a different reason for a malfunctioning lock. They can loosen and fall out or break off completely, preventing the lock from working correctly. A screwdriver is a tool to tighten the screws however, care must be taken not to tighten them too much as this can damage the internal components.
A faulty lock can be dangerous for both you and your family, especially if you have small children. It is possible for them to open the door without your knowledge and give them access to your home. If you're worried about this happening, then a vetted locksmith can provide a quick and efficient service to re-secure your double glazing doors.
Misty Glaze are a professional uPVC and double glazing business in Lancing, who can repair any type of defective and damaged mechanisms, handles, cylinders and lock systems on both uPVC windows and doors. We can also alter your uPVC or double glazing locking system to meet your particular needs, which means that in a lot of cases replacement windows and doors are not required.
Handles that are damaged or broken
A lot of double-glazed windows come with a multi-point lock as a part of the overall security package. This is a great option for those who are concerned about burglars who are opportunistic and trying to gain entry to their home. It's also worth asking your installer about anti-lift locks which can be put in on top of the existing locks and help keep your window firmly locked in the closed position.
It's not uncommon for handle locks to get damaged or fail - they are the first part of your window that could be forced open by a criminal intent on breaking in. The good news is that this is among the easiest parts to repair.
Modern uPVC handles and aluminum handles come with a multi-point locking mechanism known as Espagnolette that is designed to prevent forced entry. This security upgrade is often available as an extra on new uPVC window installations. Older uPVC and aluminium handles can be upgraded to lock bolts that shoot also as an optional option on double-glazed windows.
If a handle is defective, it's crucial to get it repaired as quickly as you can. Handles that are damaged can prevent the window from closing correctly and allow drafts in. It could also be a weak point that burglars who are opportunistic might exploit, placing your home and belongings at risk of being taken.
To repair the damaged mechanism, first gain access to the window frame, then take off the broken handle. The gearbox that opens the handle is then located and the model is identified so a replacement can be sourced which is in line with the profile of the internal window frame mechanism.
After the mechanism has been repaired, the handle may be put back together using the original screws. However, we recommend replacing them with longer screws as they will provide the most secure fit. The final step is to seal the handle with an opaque sealant. This will shield it from further corrosion. After double glazing repair , your window will be fully operational again, and at only a fraction of the cost of replacing the entire window.
Broken or damaged hinges
If your windows do not close properly, you may be experiencing draughts, the weakening of your home's security and a higher chance of damp or water damage. Broken or damaged window hinges are a frequent issue that can be fixed easily.
If your uPVC windows don't close or open and close, it's likely hinges need to be replaced or repaired. While most window manufacturers require you to purchase a new window to resolve this simple issue We're able to repair the faulty hinges and save you money.
Window hinges can be damaged by repeated use or weakened over time by corrosion. In the event of a damaged hinge, it's important to take measures to prevent further damage by being careful not to force the window open or closed.
You can locate the appropriate parts for your hinge by identifying its type. The most commonly used types of window hinges include Maco, Mila, Roto and many other brands. It is recommended to consult an expert in this situation to ensure that you don't make the mistake of purchasing parts that aren't compatible with your current hardware and cause further damage.
The hinges that are not working properly can be a huge issue for uPVC windows and doors. They can be an important source of noise, and can also allow water to get into your windows.
To resolve this issue, first check whether the pin barrel on both hinge halves is aligned. If it's not tapping the headpin, use a hammer in order to create a slight bend in the hinge barrel. This will help to keep the pin in the right position. Then, ask a friend to hold the door while you remove the hinges and hinge screws from both the doorjamb as well as the door. Replace the hinges using those of a matching size and attach the screws using glue. When the glue is drying, put a secure hold on the hinges with clamps or weights.
After your hinges have been repaired, you should be able to put back the door and then reattach the handle. It is a good idea to replace the screws using the same length of dowels as the screw that was originally used so that they match up with each the other.
Glass that is Broken or Faulty
uPVC Windows can be damaged in time, despite the fact they are great at keeping cold out and conserving the heat. This can be the case with broken or damaged glass, as well as faulty locks. This is a problem that can be very expensive when left unattended. It can also detract from the aesthetics of your home and may lead to a loss of insulation, which is why it's important to repair any damage as soon as you can.
You can repair your cracked glass by yourself if your have the proper tools and techniques. Make sure that the area around the glass that has been broken is free of debris to ensure that pieces of glass do not cause injuries or cause a trip hazard. Then, you must remove any pieces of broken glass and dispose of them properly. Apply masking tape across the entire area. This will stop glass fragments from sticking to your skin and scattering when you move them. Pre-fitting the glass pane prior to gluing it in place is a good idea if you are dealing with a window that has two panes. This will ensure you have enough space to complete your project.
Before applying the glue, clean the surface of the damaged frame and the glass with a a dry, clean cloth. Follow the instructions for application and curing times which may differ from product to product. You may need to clamp the broken glass with clamps made of lightweight materials designed to hold delicate materials, depending on the angle.
When the adhesive has completely set, carefully place the glass inside the window frame, ensuring it's flush with the edges of the frame, and there aren't any gaps between the glass and the window sash. Be careful to avoid flexing the window as it's being installed, as this could weaken the seal and cause condensation and water infiltration.
Contact a professional glazier like O'Brien(r) to arrange an appointment to replace your glass if the window is completely broken. Leaving broken glass unattended can cause danger to pets and children, so it's essential to act fast.