How To Survive Your Boss With Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC is a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not rust or rot.
Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce repair costs as well as improve energy efficiency.
1. Broken Glass
If the glass in your window is damaged, it could cause a large amount of damage to your home, making it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good condition.
For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case, you will need to find some plastic spacers to help the new pane to fit perfectly into the frame of the window.
If you're planning to try to remove the glass panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not onto the floor which could cause them to be trampled under.
It's a great idea to seal the gap after the glass is removed. This will prevent water and drafts from entering your property until a professional is able to fix the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the gap between the door and the window is large, you might need to consider security screens that has a window. This will provide the best of both.
2. Sagging
uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can be affected by a variety of issues such as sagging. A sagging uPVC window could cause issues with light, draughts and even security. It is crucial to act when you notice your uPVC windows are sagging.
Repositioning the hinges can aid in fixing a window which is sliding. You'll first need to open the windows so you can reach the frame. With an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having repositioned your hinges. If you're satisfied with the fit, tighten the screws to ensure that they stay in the right place.
If you are unable to reposition the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to lose tightness. If window repairs near me happens, it's essential to replace the seal as soon as possible so that your uPVC windows are waterproof and safe from drafts.
uPVC handles may also become loose. This is often caused by screws that have become undone over time, but it could be due to the handle mechanism getting worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close your window and do a test to ensure that it fits. The corners of the sash need to be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism back into place.
3. Water Leaks
If you wake up to damp floors and mouldy walls each time it rains it's crucial to take action. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.
This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the issue is, old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.
It is important to check that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme instances, you may need to replace the window.
Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread across the home.
If the leakage occurs between the double-glazed window, it is more likely the issue is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or are loose and blow open in a breeze, it may be hinges at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.
Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It is very easy to replace a hinge on a window however it is easier if someone helps you hold the frame.
Make sure that the uPVC hinges open and close in the proper direction. You can do this by looking for the arrows on each hinge. This indicates which way the window should be opened.
The issue could be caused either due to opening the window in the wrong way or due to a poor installation at the factory. This can often be resolved by sending us a picture via our website and we will be pleased to offer you suggestions.
Regularly lubricating the hinges is essential. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.
5. Draughts
Draughts in upvc windows can be caused by a few different things. The hinges, also because of wear and tear, can become misaligned, this will cause an opening to appear where the sash meets the frame. If they are beyond repair, it could be necessary to have them realigned. The second is the interlock, which is located on the hinge side of the window, can be misaligned. Again, it's possible to just give them a thorough clean, however in some cases it might be necessary to have them replaced.
The next most common reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures, and also reduce the risk of draughts.
Lastly, one of the most effective ways to cut down on drafts is to use a draught excluder, these are typically made of fabric which are filled with a type of filler. They can be placed on the top of your windowsill. These will keep your home warm by blocking cold air.
With a little regular maintenance and repairs windows made of upvc will continue to provide excellent insulation and security for your home. However, it is important to recognise that all windows have a life span and there may come a point where it is more cost-effective to replace them rather than fix them. So, if you're experiencing issues with your Upvc windows, it's best to seek professional assistance immediately.