17 Signs That You Work With Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as aluminum and timber.
Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from unnecessary repair costs and improve the efficiency of energy.
1. Broken Glass
The damaged glass in your windows can cause severe damage to your home and even be fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good condition.
Single-pane windows are relatively simple to replace, and they typically fit into old frames very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the old panes. In this case you'll need source some plastic spacers to assist the new pane to fit perfectly into the frame of the window.
Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.
Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block water and drafts from entering the property until a professional can come out and repair the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the distance between the window and the door is large, you might need to consider a security screen that also includes an opening. This will provide the best of both.
2. Sagging
uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a variety of issues such as sagging. A window that is sagging can cause problems with light, draughts, and even security. It's important to take action when you realize that your uPVC windows are sliding.
Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll need to open the window to access the frame. With the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have moved your hinges. If you're satisfied with the size of the window, you can tighten screws to secure them in the right position.
If you can't reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows are watertight and draught-proof.
uPVC handles can also loosen up. This is often caused by screws that have been removed over time, but it could also be due to the handle mechanism wears out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and perform an initial fitting. The corner joints of the sash should align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into its original position.
3. Water Leaks
It is important to take action if you wake up every morning to discover mouldy walls and wet floors. Water leaks from windows are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature within your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.
This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the problem the caulking used previously may need to be removed before a fresh layer can be applied. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and could reduce your energy efficiency.
It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.
Mold spots and rotted sills are another sign of water leakage. This mold thrives in damp environments and can quickly spread across the home.
If the leakage occurs between the double-glazed glass, it is more likely the issue is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or slack and open with ease It could be hinges that are at the fault. Any competent DIYer can replace hinges in just a few minutes.
Like any mechanical part hinges are prone to be damaged over time. It's easy to replace a hinge on a window however it is easier if someone helps you to hold the frame.
Make sure that the uPVC hinges are open and closed in the correct direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should open.
Faulty window hinges can be caused by incorrectly opening the window a certain way or due to inadequate installation at the factory. Sending us a picture via our website will often resolve the problem. We are more than happy to offer assistance.
Regularly lubricating the hinges is essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.
5. Draughts
Draughts can be caused by different factors. First, the hinges because of wear and tear, could become misaligned. This can cause gaps to develop where the sash meets the frame. This can be easily repaired by giving them good clean, but if they are beyond repair it might be necessary to get them realigned or replaced. Second, the interlock can also become disaligned. It is located on the hinge's side and could require to be cleaned. In some cases it might be necessary to replace the hinges.
The next common reason for draughts are the window seals, these can become worn down or damaged over time and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. double glazed window repairs is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce the possibility of draughts.
The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They can keep your home warm by blocking cold air.
With a little regular maintenance and repairs windows made of upvc will continue to provide a great level of insulation and security for your home. However, it is important to realize that all windows have a life span and there may come the point when it's more cost-effective to replace them rather than fix them. If you have any problems with your upvc window, it's best to consult a professional as soon as you can.