20 Repair Window Websites That Are Taking The Internet By Storm

When It's Time to Repair Windows
If your windows require repair, it's important to work carefully. First, you should wear a pair of safety goggles and gloves that are cut-resistant to prevent shards of glass from cutting you during your work.
Placing a plastic cover over the crack is a simple solution for a window that has cracked. This will stop rain, snow and insects from getting into your home.
Cracked Glass
Glass that is cracked not only make your home less attractive however, it could also let drafts and other elements into the home. It doesn't matter if cracks result from an impact like soccer or a baseball or stress, such as the sudden temperature change, it is important to have them fixed as quickly as you can to prevent further damage and keep your windows functioning correctly.
If your window is cracked, but not broken, a quick fix is to apply clear tape to cover it. This is a quick, low-cost solution to protect your window from dust, water, bugs and other sand. It also helps keep out the weather.
If the crack is large or appears to be getting worse, it's best to seek out a professional. A professional glazier will determine the cause of a crack and recommend the best repair method.
Impact cracks are the most popular type of window break usually resulting from a solid object hitting your window with enough force to break it. The cracks are usually with a starburst-like pattern of lines and broken pieces that can be risky if they break loose. If you have double pane windows, this crack could compromise the gas layer between the panes and impact the efficiency of your window's energy use.
Another type of crack is a stress crack which develops gradually over time due to extreme temperature fluctuations or other environmental factors. These cracks usually begin near the edges of your window, and eventually expand into full-blown break.
A pressure crack is a much more serious crack but it is still able to be repaired. It is a curvy curved line that can extend across the window on one or more sides. It can be caused by low or high pressure which can cause the glass to expand or contract.
There are other products that can be used to repair cracks in windows if you're willing go beyond tape and nail varnish. A product such as Glass Repair Film is a little more expensive, but will provide more protection and longevity for your windows. If you'd prefer to go the DIY route epoxy is a durable adhesive that can fill in cracks to help keep them from getting worse and make your window look like it has never had a crack at all!
Leaking Windows
If you notice a damp zone under your window, or the wood surrounding it is soft or rotting it could be time to replace your windows. Excessive moisture creates the perfect environment for mold and mildew, which can lead to a myriad of issues for your home. They can reduce indoor air quality, lead to sagging of drywall and worsen allergy symptoms. If left unchecked they could cause structural damage to the house.
window repair is best to call an expert if the water is visible or leaking from outside. Do not ignore windows that are leaking. They are the most frequent cause of mold and structural damage.
In many cases, a thin layer of caulking is all you need to stop the leaks. It is important to clean the area first, though, and take off any caulking that is old before applying a new layer.
Examine the weepholes on the frame for any debris. These holes are designed to drain rainwater, but they could become clogged over time with insect corpses or other debris.
Check the seal between your double-paned windows and the metal frame. This will help to maintain the gas from escaping between the panes, which makes windows more energy efficient. Over time the seal may get worn out and let water to enter your home.
Another indication of a leak is the presence of water stains on ceiling and walls. These are caused when the drywall is saturated by moisture, which weakens its fibers and causes discoloration. There is also the possibility of peeling paint caused by the effects of water destroying its adhesive properties and pulling it away from the wall.
Faux Muntins & Mullions
In the past, mullions and muntins (or glazing bars in the UK) separated and held panes of glass in traditional multi-pane windows. After WWII, larger expanses tempered glass were available. They're mainly used as decorative elements in some older homes.
Wind or rain can damage the support of a single piece or small group of them, creating a crack in the window. The good part is that you can repair the majority of these decaying or brittle parts.
First, clean the affected areas with a cloth and an ammonia-based cleaner that won't leave a residue. Remove any loose or rotting parts and use an exacta-knife to trim the intersections between the vertical and horizontal painted window muntins. After trimming the intersections, use painter's masking tape to tape off the lower part of the window frame. Apply a thick coat of white paint to the areas that you lightly painted in the initial pass. Allow the paint to dry completely before taking off the tape and applying another coat.
If the issue is more severe, such as an hourglass-shaped crack in middle of the window, it's better to replace the sash. In such cases you'll have to search for a replacement that matches the existing window in both the design and size.
For a less expensive alternative you can also put in an attached grid window. These windows consist of a glass pane, with a set of muntins that are glued on the surface. This gives them a divided appearance. These windows aren't as energy-efficient as traditional ones.
Installing a drip cap will prevent water from leaking into the window frame. You can find a variety of these aluminum drip caps at the majority of home centers for around $20. They are much simpler to install than replacement windows sashes, and will provide the same functionality as a real mullion or a muntin.
Broken Sashes & Frames
A damaged window sash is an obvious indication that it's time to seek some help. If it's not checked, a damaged sash could cause water leaks, wood rot and more serious issues with the frame and sill. If you have a damaged sash, you should replace it right away to ensure that the window is sealed.
Often, the issue is caused by worn or improperly installed sash cords. It is easy to replace these cords on most double-hung window models. First, you'll need to remove the metal tabs holding the sash. Then, push up on the side of the sash (it doesn't really matter which side) and then pull toward the opposite side in order to remove it. To reach the cords of the sash, you'll need to remove the parting strips that separate the sash.
It is important to compare the metal tabs of the old sash to the new one. If they're not the same, it may be difficult to insert the new sash in its proper place and could affect how well the sash operates. Fortunately, this issue can be corrected by simply placing tabs in their proper places on your new window.
You'll need to inspect your window frame as well for any damage or decay. It's a good idea to check it regularly since the wood shrinks and gets worn down as time passes, particularly with exposure to the elements. You should fix any visible damage as quickly as possible to avoid a more serious issue.
If your window frames are in bad condition, you'll need to treat them using a homemade preserver made by mixing half mineral spirits with half boiling linseed oil. After the treatment has dried for two full days, you can then finish your frames with high-quality latex paint. A fresh coat of paint will also protect your window against the elements.