How To Outsmart Your Boss On Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as timber and aluminum.
It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs as well as improve energy efficiency.
1. Broken Glass
The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is important to take the time to make sure that you are doing everything you can to ensure that your windows are in good condition.
Single-pane windows are relatively simple to replace and will usually fit into the frames of the past easily. However when you have double pane windows that are held in place by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance you'll need locate some plastic spacers to assist the new pane to fit correctly into the frame of the window.
Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass so that any fragments of glass fall onto the fabric instead of onto the floor where they could be trampled upon and cause further damage.
Once the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional comes out and fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap between the door and the window is significant, you may prefer an alarm system that includes an opening. This will give you the best of both.
2. Sagging
uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may develop a number of problems, including sliding. A sagging window in uPVC could cause issues with light, draughts and even security. It is crucial to act when you realize that your uPVC windows are sagging.
Repositioning the hinges could aid in fixing a window which is sliding. To accomplish this, you'll need to open the window so that you can access the frame. After that, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to hold them in the right position.
If you are unable to reposition the hinges, you could have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to lose their tightness. It is essential to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.
UPVC handles can also become loose. Often, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. The first step is to close the window and perform an initial test to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original position.
3. Water Leaks
If you wake up to wet floors and damp walls each time it rains it's crucial to take action. Windows that leak water do can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.
This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue is, the old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.
Check that any drainage holes are free of debris in them, and also that the sill pan is angled correctly to drain away from the window. In more extreme situations, you may have to replace the window.
Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and is able to quickly spread throughout the home.
If the leakage occurs between the double-glazed window, it is more likely that the problem is with the seal than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or slack and open with a breeze It could be the hinges that are at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.
Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's very simple to change the hinges on a window, but it's easier if someone helps you hold the frame.
It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.
The problem can be caused either due to opening the window in the wrong way or a faulty installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be more than happy to give you advice.
It is also essential to grease the hinges regularly. Applying a light engineering lubricant to the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It also decreases the risk of a window sticking and help prevent corrosion. The ideal time to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.
5. Draughts
Draughts in Upvc windows can be caused by different things. The hinges can also be disaligned as a result of wear, creating an opening where the sash meets frame. If they are beyond repair, it could be required to realign them. The interlock, which is located on the hinge of the window and can also become misaligned, again it's possible to give them a good clean, but in some instances it could be necessary to have them replaced.
The seals may wear out or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and again will lessen draughts.
The last way to reduce the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They will help keep cold air out and keep your home warm and cosy!
With a bit of regular maintenance and repair your windows made of upvc will continue to provide excellent security and insulation for your home. It is crucial to realize that all windows have a life span and they may reach the point when it's more cost-effective to replace them rather than repair them. So, if view website experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as possible.